Canon imageclass LBP251dw User Manual Download Page 185

Page: 185 / 495

Changing the Maximum Transmission Unit

0W20-03J

In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a chunk of

data into which the original data is divided before being sent. The maximum transmission unit (MTU) may vary on each

network. Change the settings of the machine as necessary. For more information, contact your Network Administrator.

Press

Use

to select <Network Settings>, and press

●

If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press

Logging on to the Machine(P. 34)

Select <TCP/IP Settings> <MTU Size>.

Select the MTU, and press

Restart the machine.

●

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

LINKS

Configuring Ethernet Settings(P. 177)
Setting a Wait Time for Connecting to a Network(P. 180)

Network

179

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands