manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 303

Paper Jams inside the Machine

23FJ-054

Remove the jammed paper according to the procedure below. Do not forcibly remove jammed paper from the

machine. If the jammed paper cannot be removed easily, proceed to the next step.

1

Close the paper stopper, and then open the toner cover.

2

Remove the cartridges.

1

Remove the toner cartridge.

Do not shake or tilt the toner cartridge. Also, make sure to avoid applying shocks to the toner cartridge,
such as by hitting it against something. Doing so may cause the toner left in the toner cartridge to leak.
Remove the toner cartridge gently at the same angle as the slot.

2

Remove the drum cartridge.

Troubleshooting

298

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands