manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 301

Countermeasures for Each Error Code

23FJ-052

If an error occurs such as when printing is not successful, the corresponding error code is displayed in the job log

screen as a three-digit number. Check the following to find out causes and solutions for each error code. For details of

the job log screen, see  <Status Monitor> Screen(P. 88)  .

#852

The machine turns OFF for some reason.

●

Check whether the power plug is inserted into an outlet firmly.

#853

A document could not be printed because its data size exceeded the machine's upper processing

capability.

●

The  machine  may  not  be  able  to  print  documents  with  many  pages.  Reduce  the  number  of  pages  per
printing, or print when no print job is queued or no document is being printed. If you are still unable to
print, check the document data for any defects.

Printing was canceled from the computer.

●

If you cancel an operation when the print data is being sent to the machine from a computer, this error
code is displayed, but this is not abnormal. Print again as necessary.

Troubleshooting

296

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands