manualshive.com logo in svg

Canon imageCLASS LBP162dw, User Manual

Share
Download
Canon imageCLASS LBP162dw User Manual Download Page 267

Common Problems

23FJ-04L

If you encounter problems when using the machine, check the items in this section before contacting us. If the

problems persist, contact your local authorized Canon dealer or the Canon help line.

Check the Following

Is the machine turned ON? Is the power cord connected?

●

If the machine is turned ON but does not respond, turn it OFF, check whether the power cord is connected
correctly, and turn it back ON. For information on connecting the power cord, see Getting Started. 
Manuals and Their Contents(P. 326) 

Are the LAN cable and USB cable connected correctly?

●

Check whether these cables are connected correctly.

Back Side(P. 78) 

Is sleep mode activated?

●

If you leave the machine unattended for a specific period of time, it enters sleep mode for power
conservation, not allowing you to operate it.
To cancel sleep mode, press any key other than the power switch.

Is any message displayed on the screen?

●

If a problem occurs, a message is displayed.  Countermeasures for Each Message(P. 285) 

If a problem persists even after checking

Click the link that corresponds to the problem.

Installation/Settings Problems(P. 263) 
Printing Problems(P. 267) 

Troubleshooting

262

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands