Canon imageCLASS LBP162dw User Manual Download Page 150

Page: 150 / 373

Setting the System Manager PIN

23FJ-031

Set a System Manager PIN that is intended exclusively for Administrators. You can access <Network Settings>, <System

Management Settings>, etc. only when the PIN has been entered correctly. It is recommended that only

Administrators know the PIN.

Select <Menu> in the Home screen. Home Screen(P. 87)

Select <System Management Settings>.

Select <System Manager Information Settings> <System Manager PIN>.

Press

Specify the System Manager PIN.

●

Enter a number of up to seven digits, and press

●

When <PIN (Confirm)> is displayed, enter the PIN once again to confirm.

●

You cannot set a PIN that consists only of zeros, such as "00" or "0000000."

●

To disable the PIN, select <

> and press

to leave the text box blank, and then select <Apply> and

press

Setting the System Manager Name

Select <System Manager Name>.

Enter the System Manager Name, and select <Apply>.

●

On how to enter text, see Entering Text(P. 93) .

●

Do not forget your PIN. If you forget your PIN, contact your local authorized Canon dealer or the Canon help
line.

Managing the Machine

145

Summary of Contents for imageCLASS LBP162dw






















































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP162dw

Reviews:

Brands by name

Popular brands

Canon imageCLASS LBP162dw, User Manual

Search results

Summary of Contents for imageCLASS LBP162dw

Reviews:

Brands by name

Popular brands