Canon imageCLASS LBP121dn User Manual Download Page 292

Page: 292 / 388

Smudge Marks Appear on the Edge of Printouts

95LW-06U

Troubleshoot by checking in the following order:

Are You Using Appropriate Paper?

●

Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.

Usable Paper(P. 13)
Loading Paper(P. 87)

Are You Printing to the Edge of the Paper Without Margins?

This symptom may occur when the margin is set to none in the printer driver. To print with this machine, a

margin of 5 mm (15 mm at the top and bottom and 10 mm on the left and right sides) is required.

On the [Printing preferences] screen of the printer driver, configure the following setting to provide a margin.

[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]

Have You Cleaned the Fixing Assembly?

These symptoms may occur when the fixing assembly is dirty. In this case, clean the fixing assembly.

Cleaning the Fixing Assembly(P. 254)

Troubleshooting

285

Summary of Contents for imageCLASS LBP121dn





































































































































































































































































































































































































Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands

Canon imageCLASS LBP121dn, User Manual

Search results

Summary of Contents for imageCLASS LBP121dn

Reviews:

Related manuals for imageCLASS LBP121dn

Brands by name

Popular brands