manualshive.com logo in svg

Canon imageCLASS D480, Basic Operation Manual

Share
Download
Canon imageCLASS D480 Basic Operation Manual Download Page 193

10-22

M

aint

enanc

e 

  Transporting  the  Machine  

 

 

 

  Transporting the Machine

Transporting the Machine

 This section describes the required procedures before transporting the machine. 

 

  For MF4370dn  

  For  MF4370dn  

 Follow this procedure to avoid vibration damage to 

the machine when transporting it over a long 

distance. 

 1

 

Turn off  the main power switch. 

  

 2

 

Disconnect the power cord and all the 
cables from the back of the machine. 

 3

 

If you are using the output tray extension, 
fold the paper stopper, and then push the 
output tray extension into the machine. 

 

 

 4

 

Hold the front side of the operation panel 
with your hands. 

 

 

 5

 

Lift the scanning platform (A) until it is 
locked. (You will hear an audible “click.”) 

 

 

 6

 

Hold the grip (A) on the right front side of 
the toner cover. 

 

 

 7

 

Open the toner cover. 

 

 

 8

 9

Summary of Contents for imageCLASS D480























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands