Canon imageCLASS D480, Basic Operation Manual

Page: 159 / 246

S
canning
7-4
Basic Scanning Operations
Basic Scanning Operations Basic Scanning Operations
This section describes the basic procedures for scanning documents.
Scanning Documents to a Scanning Documents to a
Computer Connected with USB Computer Connected with USB
Cable Cable
This section describes the basic procedure for using
the operation panel of the machine to scan via USB.
Scanned documents are transmitted via USB to your
computer.
Your machine must be connected via USB and the USB
scanner driver must be loaded to scan.
For better scanning quality, we recommend that you place
documents on the platen glass. If you use the ADF, the
scanned image might not be clear.
1
Place documents.
2
Press [SCAN] repeatedly to select
<USB SCANNING>.
For MF4350d, just press [SCAN] to display
<SCANNING MODE>.
–
–
3
Press [Start].
If you are asked to select a program to launch,
select “MF Toolbox Ver4.9.” The scanned
document will be processed according to
your settings.
When scanning is complete, a folder with the
scanning date will be created in the [My
Pictures] folder in the [My Documents] folder,
and your document will be saved in this
folder. (In Vista, the folder will be created in
the [Pictures] folder.)
Scanning Documents from a Scanning Documents from a
Networked Computer (MF4370dn Networked Computer (MF4370dn
Only) Only)
This section describes the basic procedure for using
Color Network ScanGear to scan over the network.
Scanned documents are transmitted over the
network to your computer.
If you are using Color Network ScanGear for the fi rst time after
installing it, the network scanner to be used must be selected
with the ScanGear Tool. For details, see “Scan,” in the e-Manual.
For better scanning quality, we recommend that you place
documents on the platen glass. If you use the ADF, the
scanned image might not be clear.
Printing fax documents and scanning documents over the
network cannot be processed at the same time. If this
happens, these documents are handled diff erently depending
on the following:
If you scan documents when the machine is receiving fax
documents, or the machine receives fax documents when
scanning documents, the machine scans documents fi rst,
then starts printing the fax documents when scanning is
complete.
If you scan documents when the machine is printing
received fax documents, scanning is canceled. Wait for the
fax documents to be printed out, then perform the
scanning operation again.
–
–
–
–
–
•
•
1
2
3