Canon imageCLASS D1320 Basic Operation Manual Download Page 40

Page: 40 / 174

2-4

ocumen

t and
P

aper

Handling

This section describes how to place documents on the platen

glass or in the feeder.

Placing Documents on the Platen Glass

Open the feeder.

Place your document face down.

Align the document with the appropriate paper

size marks.

If the document does not match any of the paper size marks, align
the center of your document with the arrow mark.

Close the feeder.

The machine is ready to scan or copy the document.
When scanning or copying is complete, remove the document
from the platen glass.

Placing Documents in the Feeder

Spread the document guides a little wider than

the document width.

Fan the document stack and align the edges of

the pages.

Thoroughly fan in

small batches

Align the edges on a

flat surface a few times

Neatly place the document face up.

• Place the document under the load limit guides (A).
• Make sure that the paper stack does not exceed the load limit

marks (B).

(A)

(B)

Placing Documents

CAUTION

Precautions when closing the feeder

• Be careful not to get your fingers caught. This may

cause personal injury.

• Do not press down the feeder forcefully. This may

damage the platen glass and cause personal injury.

Summary of Contents for imageCLASS D1320















































































































































































Search results

Summary of Contents for imageCLASS D1320

Reviews:

Related manuals for imageCLASS D1320

Brands by name

Popular brands

Canon imageCLASS D1320, Basic Operation Manual

Search results

Summary of Contents for imageCLASS D1320

Reviews:

Related manuals for imageCLASS D1320

Brands by name

Popular brands