Canon imageCLASS D1120 Basic Operation Manual Download Page 255

Page: 255 / 305

12-12

Troubleshooting

Clearing Jams

Open and close the front cover to reset

the machine.

If you are using the multi-purpose tray, close it

before opening the front cover. To open the

front cover, push the open button (A).

Be careful not to get your fingers caught.

Duplex Unt

When <OPEN PRINTER COVER> or <PAPER JAM/LIFT
PANEL TO OPEN> appears on the display, remove
jammed paper from the duplex unit.

Pull out the paper cassette.

●

Hold the paper cassette with both hands

and remove it from the machine.

Open the duplex print transport guide,

holding its tab (A) on the left side inside

of the machine.

Hold both sides of any jammed paper and

gently pull it out.

Do not force a jammed paper out of the machine.

Summary of Contents for imageCLASS D1120


















































































































































































































































































































Search results

Summary of Contents for imageCLASS D1120

Reviews:

Related manuals for imageCLASS D1120

Brands by name

Popular brands

Canon imageCLASS D1120, Basic Operation Manual

Search results

Summary of Contents for imageCLASS D1120

Reviews:

Related manuals for imageCLASS D1120

Brands by name

Popular brands