Canon imageCLASS D1120, Basic Operation Manual

Page: 181 / 305

Fax (D1180/D1170/D1150)
6-50
ECM Reception
ECM Reception
ECM (Error Correction Mode) reduces the effect of system and line errors on documents that
occur during sending or receiving with another fax machine that supports ECM. If the other
machine does not support ECM, this setting is ignored. If reception speed appears to be
extremely slow, you may be able to speed up reception time by turning ECM off. The default
setting is <ON>.
If you want to communicate using ECM, it is necessary that ECM Reception be set in both the sending and receiving
machines. This function does not operate unless ECM is set in both machines.
Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.
If there is trouble with the line, it will take more time to receive the documents. –
–
–
1
Press [Menu].
2
Press or to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press or to select <FAX
SETTINGS>, then press [OK].
3 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press or to select <RX SETTINGS>,
then press [OK].
4 . R X S E T T I N G S
F A X S E T T I N G S
5
Press or to select <ECM RX>, then
press [OK].
1 . E C M R X
R X S E T T I N G S
6
Press or to select <ON> or
<OFF>, then press [OK].
O N
E C M R X
<OFF>: The ECM reception is not activated.
<ON>: The ECM reception is activated.
7
Press [Stop/Reset] to return to the
standby mode.
–
–