Canon IMAGE RUNNER C9075 PRO Operating Manual Download | Manualshive

Page: 170 / 218

background image

Clearing Paper Jams

2-82

2

Troubleshooting

Output Area of the Staple Finisher-B1/Booklet Finisher-B1 (Optional)

If a paper jam occurs in the output delivery unit of the Staple Finisher-B1 or Booklet Finisher-B1, a screen prompting you to
remove the jammed paper appears on the touch panel display. Check the location of the paper jam, and follow the procedure
described below, and the procedure that appears on the touch panel display, to remove the jammed paper.

There are some areas inside the machine which are subject to high-voltages . When removing jammed paper or when inspecting

the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may

result in burns or electrical shock .

When removing jammed paper, take care not to cut your hands on the edges of the paper .

When removing paper which has become jammed inside the machine, take care not to cut your hands or injure yourself on the

inside of the machine . If you cannot remove the paper, contact your local authorized Canon dealer .

When removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paper

to come into contact with your hands or clothing, as this will dirty your hands or clothing . If they become dirty, wash them

immediately with cold water . Washing them with warm water will set the toner, and make it impossible to remove the toner stains .

When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on

the paper from scattering and getting into your eyes or mouth . If the toner gets into your eyes or mouth, wash them immediately

with cold water and immediately consult a physician .

1

Open the output slot on the outside of the finisher, and remove any jammed paper that is visible .

If you cannot see any jammed paper, check if any jammed paper is stuck inside the output area of the finisher.

If a paper jam occurs when you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled.

(Printing and stapling resume after you clear the paper jam.)

2

Open the front cover of the finisher .

Booklet Finisher-B1

Staple Finisher-B1

If the Document Insertion/Folding Unit-G1/Document Insertion Unit-J1 is attached, open the insertion unit. See e-Manual > Optional

Products (imageRUNNER ADVANCE C7065/C7055).

•

•
•

•

«
...
168
169
170
171
172
...
»

Summary of Contents for IMAGE RUNNER C9075 PRO



























































































































































































































Reviews:

No comments

Related manuals for IMAGE RUNNER C9075 PRO

Brand: JCM Pages: 70

Brand: ABLE Pages: 42

MP 2554SP Series

Brand: Ricoh Pages: 1

Brand: Citizen Pages: 46

Brand: Linux Pages: 8

8200DX - Phaser Color Solid Ink Printer

Brand: Xerox Pages: 2

Brand: MIMAKI Pages: 28

invitrogen EVOS FL

Brand: Thermo Scientific Pages: 6

THERMOMARK CARD

Brand: Phoenix Contact Pages: 35

Brand: Oki Pages: 138

Brand: Sartorius Pages: 202

Brand: Canon Pages: 88

Brand: Canon Pages: 56

Brand: Canon Pages: 364

Brand: Canon Pages: 32

Brand: Loadrite Pages: 16

Brand: Epson Pages: 16

980N - Stylus Color Inkjet Printer

Brand: Epson Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands