Canon image RUNNER 3245, Getting Started Manual, Page: 120 / 180

Protocol Settings 7-4
7
Using a NetBIOS Network
1
On the Network Settings screen, press [SMB Server Settings]
→
specify the
following.
[On] for < Use SMB Server>: You can use the SMB server.
In [ Server ], enter the name of a computer that the machine connects to, using the keyboard on the
touch panel display. Be sure to enter a unique name that does not exist as a name for another computer
or printer on the same network.
In [ Workgroup ], enter the name of the workgroup the machine belongs to, using the keyboard on the
touch panel display.
If there is no workgroup on your environment, create a workgroup in the Windows environment, and
then enter the workgroup name.
In [ Comment ], enter a comment about the printer, if necessary. If you display the printer information, the
comment you specified here appears.
If you want the machine to notify the LAN Manager of its existence on the network, press [On] for < LM
Announce >. If the LAN Manager does not have to refer to the machine, you can control the traffic over
your network by selecting [Off ].
To set up an SMB printer, press [SMB Printer Settings]
→
[On] for <Use SMB>
→
enter the printer name of
the machine in [Printer].
You cannot enter the domain name as the workgroup name.
You cannot enter a character string that includes blanks in [Server] and [Workgroup].
Optional equipment is required to print or send a fax from a computer. For the equipment needed, see
“Optional Equipment and System Requirements for Connecting to a Network,” on p. 3-2.
You cannot enter a character string including blanks in [Printer].
•
•
•
•