Canon image Prograf iPF780 Series, User Manual

Page: 270 / 648

9
Select Next .
10
Select Media Type .
11
Enter Copies .
12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper) .
The upper and lower margins can be checked in Print Preview .
Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• When Saturation is selected, you can print posters, etc., vividly.
• Press the Print Preview button to display the preview screen. You can check and make changes to the layout
in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
13
Press Print to start printing.
Important
• If divided into plural pages, try reducing the data size or the range you select.
• You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.
Print Selected Area(Excel)
Print Selected Area(Excel)
For resizing the selected range of cells to fit the roll width. Choose this option to enlarge a particular part of the sheet
before printing.
1
Start Microsoft Excel .
2
If Start imagePROGRAF Print Plug-In is displayed, click it.
3
Click Print from the imagePROGRAF Print Plug-In toolbar/ribbon.
Important
• When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one worksheet
and click Print again.
Print Selected Area(Excel)
iPF780
User's Guide
Windows Software
Print Plug-In for
Office
270