Canon image Prograf iPF780 Series Service Manual Download Page 205

Page: 205 / 326

Chapter 6

6-18

6.3 Service Software

6.3.1 L Printer Service Tool

0031-2633

a) Function of L Printer Service Tool

This tool has the following function.

- Updating the firmware of printer

- Color check of multi sensor

- Displaying the printer information

Connection method with the computer:

USB, Network

b) Screen description

F-6-1

[1] Main menu

Choose the menu to execute.

[2] Main menu button

Choose the menu to execute between the [Information] and the [Firmware] and the [Files].

[3] Sub menu button

The sub menu button is displayed according to the menu choosed by main menu or main menu button.

[4] Printer information area

The information of the printer connected with computer is shown according to the choosed menu.

[5] Message area

The message of executed menu is shown. And the message is saved as the text file when choosing the "[Service]-[Save Message]" of the main menu.

c) Operation

1) Showing the information of the printer

The data of PRINT INF or status print is shown.

(1) Choose the [Information] of the main menu button or the "[Service]-[Information]" of the main menu.

F-6-2

(2) Choose the printer from the list shown to the printer information area.

[1]

[2]

[3]

[4]

[5]

Summary of Contents for image Prograf iPF780 Series







































































































































































































































































































































Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands

Canon image Prograf iPF780 Series, Service Manual

Search results

Summary of Contents for image Prograf iPF780 Series

Reviews:

Related manuals for image Prograf iPF780 Series

Brands by name

Popular brands