Canon image Prograf iPF680 Series, User Manual, Page: 69 / 702

9
Select the
C
Enlarged/Reduced Printing check box.
Note
• If the
C
Enlarged/Reduced Printing check box is not
displayed on the Page Setup sheet, clear the
B
Bor-
derless Printing check box.
10
Click
E
Fit Roll Paper Width .
Note
• After you click
E
Fit Roll Paper Width , the Information dialog box is displayed. Select the width of the loa-
ded roll in the Roll Paper Width list and click OK .
• Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings,
see "Confirming Print Settings ."
➔
P.161
Resizing Originals to Fit the Roll Width (Mac OS)
Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
iPF685
Resizing Originals to Fit the Roll Width (Mac OS)
User's Guide
Enhanced Printing Options
Printing enlargements or reductions
69