Canon i900D Series, Service Manual

Page: 38 / 52

For an unknown reason, when a memory card containing partially-damaged data (detected by
software such as ScanDisk as a “Bad Block”) is inserted, and printing is attempted, there is a
possibility that printing as well as some key operations may not be possible. Rectifying the Bad Block
in the applicable image files through file recovery software such as ScanDisk may correct the
problem.
- Data in digital camera is processed on PhotoShop6.
When the original image file taken by the digital camera is processed on PhotoShop6, as PhotoShop6
leaves the thumbnail image in the original image file without deleting it, the following phenomena
occur:
-> Pre-processed data is displayed on the LCD for a moment. (In the LCD specifications, if the
thumbnail image exists in the image file, the thumbnail image is displayed, and then full resolution
image is displayed.)
-> In Plain paper / Standard mode in Index printing, as printing is conducted using the thumbnail
image, processed images are not printed. (In High quality mode, full resolution images are printed
even the thumbnail images exist, therefore processed images are printed.) In
PhotoShop5.5, as the
thumbnail image is deleted after processing, the above phenomenon does not appear.
4.2.4 Supported file names
DOS Ver.6.2 compliance
Up to four hierarchies of files; ex. ¥aaa¥bbb¥ccc¥img.jpg, ¥aaa¥bbb¥ccc¥img.tif
- Length limitation:
Up to 60 characters of name and directory name
- Extension: 3 characters (4 character extensions (JPEG/TIFF) are not supported.)
2 - 9