Canon i-SENSYS MF623Cn, Important Safety Instructions And Installation Manual

Page: 530 / 782

Remote RX
Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote Reception). When a fax is
sent to the machine, you can receive it just by picking up the handset of the telephone and entering a specific ID number by using
the telephone. This feature can save you the trouble of going all the way to the machine. For instructions on how to use Remote
Reception, see
Using a Telephone to Receive Faxes (Remote Reception) .
Off
On
00 to 25 to 99
Switch to Auto RX
Specify settings for automatically receiving a fax after the machine has rung for a specified time period. This feature is only available
when <Manual> is selected for the receive mode. By using this feature, faxes can be received even when no one is available to pick
up the handset.
Off
On
1 to 15 to 99 (sec.)
Memory Lock Settings
Select whether to store received faxes without immediately printing them. Stored fax documents can be printed at any time by
changing the setting to <Off>.
Storing Received Faxes into Memory (Memory Reception)
Off
On
Memory Lock PIN
Report Print
Off
On
Memory Lock Time
Off
On
Memory Lock Start Time
Memory Lock End Time
<Menu> <Fax Settings> <RX Function Settings> <Incoming Ring> <On> Specify how many times
the incoming call rings <Apply>
*1
<Menu> <Fax Settings> <RX Function Settings> <Remote RX> <On> Specify the ID number for
receiving a fax <Apply>
<Menu> <Fax Settings> <RX Function Settings> <Switch to Auto RX> <On> Specify how long the
incoming call rings <Apply>
RX Print Settings
㻡㻟㻜㻌㻛㻌㻣㻟㻡