Canon i-SENSYS MF6180dw, Manual

Page: 824 / 1040

Action 1
Check the SSL encrypted communication settings in the POP server.
"Configuring Advanced E-mail Settings"
Action 2
Clear the [Use SSL] check box for the POP server. If the problem persists, clear the [Use POP
Authentication Before Sending] check box, and set the communication setting to a setting other than POP
before SMTP.
"Configuring Advanced E-mail Settings"
Problem 2 When verifying an SSL server certificate to communicate to the POP server, a verification error occurred.
Action 1
Check that the CA certificate that signed the SSL server certificate on the POP server side is registered to
the machine by using the Remote UI.
"Specifying Keys and Certificates/CA Certificates"
Action 2 Check that the SSL server certificate on the POP server side is valid.
Action 3 Check that the SSL server certificate is not a self-signed certificate.
#846
Problem An e-mail could not be sent due to a POP authentication failure.
Action
Check the setting, and try again.
"Configuring E-Mail Send Settings"
#852
Problem The machine turns OFF for some reason.
Action Check whether the power plug is inserted into an outlet firmly.
#853
Problem 1
A document could not be printed because its data size exceeded the machine's upper processing
capability.
Action
The machine may not be able to print documents with many pages. Reduce the number of pages per
printing, or print again when no print job is queued or no document is being printed. If you are still unable
to print, check the document data for any defects.
Problem 2 Printing was canceled from the computer.
Action
If you cancel an operation from the printer driver when the print data is being sent to the machine from a
computer, this error code is displayed, but this is not abnormal. Print again as necessary.
Problem 3 A secured document that was left unprinted was deleted.
Action
If the secured document is not printed within a specific period of time (30 minutes by default), it is deleted
from memory. Send the secured document again, and print it within the period.
"Entering PIN for Printing (Secure Printing) "
Problem 4 Printing using Secure Print was attempted when Secure Print was restricted.
Action 1
When <Secure Print Settings> is set to <Off>, you cannot use Secure Print. Set the setting to <On>.
"Setting Secure Printing"
Action 2 Print without using the Secure Print.
㻤㻞㻠㻌㻛㻌㻥㻢㻠