Canon i-SENSYS MF6140dn, User Manual, Page: 279 / 1040

0FR4-065
When making an overseas call, you may need to add a pause to the fax number.
Since signals are transmitted over long distances across a complicated channel, your call may not be connected without
adding a pause after the country code or in front of the fax number. By adding a pause, enough time elapses before the
machine starts dialing the number again.
1
Place your fax.
"Placing Documents"
"Supported Document Types"
2
Press [ ].
3
Specify the scanning settings as needed.
"Changing the Scan Settings (Fax)"
4
Enter the international access code using the numeric keys.
For more information on international access codes, contact your telephone company.
5
Press [ ] (R) to enter a pause as needed.
The letter <p> is displayed to indicate that a pause is added.
The default pause length is two seconds
*
. To change it, see " Pause Time ."
To add more pauses into the dialing sequence, press [ ] (R) again.
*
The default pause length varies depending on the country where you are using the machine.
Sending a Fax Abroad (Adding Pauses)
㻞㻣㻥㻌㻛㻌㻥㻢㻠
Downloaded from ManualsPrinter.com Manuals