Canon i-SENSYS MF211 Series Service Manual Download Page 23

Page: 23 / 308

1-13

Product Overview > Name of Parts > Control Panel > Touch Panel

Control Panel

■

Touch Panel

[10]

[1]

[11]

[2]

[12]

[3]

[13]

[4]

[14]

[5]

[15]

[6]

[16]

[7]

[8]

[9]

No.

Key/LED Name

Function

[1] [HOME] key

Press to display the <Home> Screen.

[2] [Status Monitor] key

Press to check the status of printing or faxing, to view the usage

history, or to view the network settings such as the IP address of the

machine.

You can also check the status of the machine, such as the remaining

amounts of paper and toner, or whether any errors occurred.

[3] [Back] key

Press to return to the previous screen.

If you press this key when specifying settings, for example, the

settings are not applied and the display returns to the previous

screen.

[4] Touch Panel

You can view the progress of copy, fax, and other jobs and error

statuses.

The display is a touch panel, allowing you to operate the screen by

touch to specify settings.

[5] [Reset] key

Press to cancel the settings and restore the previously specified

settings.

[6] [Clear] key

Press to delete the entered numbers and text.

[7] Numeric keys

([0]-[9] keys)

Press to enter numbers and text.

[8] [Stop] key

Press to cancel copying, faxing, and other operations.

[9] [Symbols] key

([#] key)

Press to enter symbols such as "@" or "/".

[10] [Stop] key

Press to cancel copying, faxing, and other operations.

[11] [Start] key

Press to scan or copy documents.

F-1-18

No.

Key/LED Name

Function

[12] [Energy Saver] key

Press to put the machine into sleep mode. The key lights up green

when the machine is in sleep mode.

Press the key again to exit sleep mode.

[13] [Quiet Mode] key

Press to put the machine into quiet mode. While in quiet mode this

key is lit in green. Press the key again

to exit quiet mode.

[14] [Processing/Data]

indicator

Blinks while operations such as sending or printing are being

performed.

Lights up when there are documents waiting to be processed.

[15] Wi-Fi indicator

Lights up when the machine is connected to wireless LAN.

[16] [Error] indicator

Blinks or lights up when an error such as a paper jam occurs

T-1-18

Summary of Contents for i-SENSYS MF211 Series





















































































































































































































































































































Search results

Summary of Contents for i-SENSYS MF211 Series

Reviews:

Brands by name

Popular brands

Canon i-SENSYS MF211 Series, Service Manual

Search results

Summary of Contents for i-SENSYS MF211 Series

Reviews:

Brands by name

Popular brands