manualshive.com logo in svg

Canon High Capacity Stacker-G1, Operation Manual, Page: 10 / 49

Share
Download
Canon High Capacity Stacker-G1 Operation Manual Download Page 10

Description of the stacker control panel

Illustration

A

B

C

D

E

[2] The items of the stacker control panel

Description of the stacker control panel

Item

Description

A

Filling level indicator (off, orange or red).

B

Stack height indicators.

C

Eject button.
The eject button LED can have the following statuses:
• Off: Normal situation
• Blinking slowly (green): The stack will be ejected at the next possible set

boundary.
Therefore, the stack will usually contain complete sets.

• Blinking fast (green): The stack will be ejected as soon as possible.

Therefore, the stack can contain incomplete sets.

• Permanent red: An error has occurred that requires opening the slide

door.

D

Error location indicators.

E

Error indicator.

Status LEDs on the stacker control panel

Status LEDs

Status

Description

No stack height indicator is lit. The stack tray is
empty.
When the machine is off or in low power
mode, the LEDs are off.

4

Description of the stacker control panel

10

Chapter 2 - Components and their functions

Canon High Capacity Stacker-G1

Summary of Contents for High Capacity Stacker-G1


















































Reviews:

No comments