Canon GX6040 Online Manual Download Page 48

Page: 48 / 403

• When you connect a Wireless Direct compatible device to the printer, select the device name

from your device.

• To change the identifier (SSID) and the password, see below.

Changing Wireless Direct Setting

Connecting a Smartphone/Tablet/Computer to the Printer

Enable Wi-Fi function on smartphone/tablet/computer.

Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.

For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/
tablet/computer.

Select

(Setup) on HOME screen.

Note

• If

User management settings

is enabled, the user selection screen is displayed before the

HOME screen is displayed.

Select

Device settings

Select

LAN settings

Select

Wireless Direct

Select

Connect to smartphone

To connect with an iPhone/iPad, select

iPhone/iPad

. To connect with a non-iPhone/iPad,

select

Others

•

iPhone/iPad

1. Select

QR Code

2. Scan the displayed QR code with the iPhone/iPad standard camera app.

The iPhone/iPad is connected to the printer.

Note

• If the iPhone/iPad and printer cannot be connected, Wireless Direct is not enabled.

See

Changing Printer Setting to Use Wireless Direct

to enable Wireless Direct.

•

Others

1. Select

Next

Network name (SSID)

and

Password

are displayed.

Summary of Contents for GX6040




















































































































































































































































































































































































































Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands

Canon GX6040, Online Manual

Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands