Canon GX6040 Online Manual Download Page 357

Page: 357 / 403

1300

Cause

Paper is jammed when feeding paper from rear tray.

What to Do

Remove the jammed paper following the instructions below.

Here, the explanation uses the example of a 2-cassette printer in the illustrations.

Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.

Hold the paper with both hands, and pull it out slowly so as not to tear it.

Note

• If you cannot pull out the paper, turn the printer back on without pulling forcibly. The paper may

be ejected automatically.

• If paper becomes jammed during printing and you need to turn off the printer to remove it, press

the printer's

Stop

button to stop the printing before you turn off the printer.

• If the paper tears and you cannot remove the jammed paper from the paper output slot or the

rear tray, remove the paper from inside the printer.

Paper Is Jammed inside Printer

If you cannot remove the paper from inside the printer, try to pull the paper out from the rear
side of the printer.

Removing Jammed Paper from Rear Side

Reload paper and select

on printer's touch screen.

357

Summary of Contents for GX6040




















































































































































































































































































































































































































Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands

Canon GX6040, Online Manual

Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands