Canon GX6040 Online Manual Download Page 287

Page: 287 / 403

Cannot Proceed beyond Printer Connection Screen (Cannot Find
Printer Connected via USB)

If you cannot proceed beyond the

Printer Connection

screen, check the following.

Check1

Make sure USB cable is securely plugged in to printer and computer.

Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the
back of the printer.

Important

• Check the orientation of the "Type-B" connector and connect to the printer. For details, refer to the

instruction manual supplied with the USB cable.

Check2

Follow procedure below to connect printer and computer again.

Important

• For macOS, make sure the lock icon is on the lower left of the

Printers & Scanners

screen.

If the

icon (locked) is displayed, click the icon to unlock. (The administrator name and the password

are necessary to unlock.)

1. Unplug USB cable from printer and computer and connect it again.

2. Make sure no printer operation is in progress and turn off.

3. Turn on printer.

Check3

Follow the steps below to install MP Drivers again.

287

Summary of Contents for GX6040




















































































































































































































































































































































































































Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands

Canon GX6040, Online Manual

Search results

Summary of Contents for GX6040

Reviews:

Related manuals for GX6040

Brands by name

Popular brands