manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 352 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 352

◦ Image data edited or processed on a computer must be printed from the computer.

Note

When a photo which has been processed on a computer is selected, "?" is displayed on the

printer's touch screen.

•

Cannot connect to the server. Please wait a while and try again.

The printer cannot connect to the server due to a communication error.

Select 

OK

 on the printer's touch screen to cancel the error and try again after a while.

Error Regarding Automatic Duplex Printing Is Displayed

Check

 See Automatic Duplex Printing Problems and take the appropriate action.

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)

The printer may have been unplugged while it was on.

Check the error message that appears on the computer and click 

OK

.

The printer starts printing.

See 

Unplugging the Printer

 to unplug the printer correctly.

Writing Error/Output Error/Communication Error (Windows)

Check1

 If the 

ON

 lamp is off, make sure printer is plugged in and turn on.

The 

ON

 lamp flashes while the printer is initializing. Wait until the 

ON

 lamp stops flashing and remains lit.

Check2

 Make sure printer is properly connected to computer.

If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer over a LAN, make sure the printer is correctly set up for network use.

Check3

 Make sure MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Deleting the Unnecessary MP Drivers and click
here to reinstall them.

Check4

 When printer is connected to your computer with a USB cable, check device

status from your computer.

Follow the procedure below to check the device status.

352

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments