manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 313 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 313

Printer Does Not Print

Check1

 Make sure printer is turned on.

If not, make sure the printer is securely plugged in and press 

ON

 button to turn on.

The 

ON

 lamp flashes while the printer is initializing. Wait until the 

ON

 lamp stops flashing and remains lit.

Note

• If you are printing large data such as photos or other graphics, printing may take longer to start. The 

ON

lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.

Check2

 Make sure that the cassette is correctly inserted.

If there is an object under the printer, the cassette cannot be correctly inserted and paper may not be correctly
fed.

Make sure there are no objects under the printer and push the cassette flatly into the printer until it stops.

Loading Plain Paper in Cassette

Check3

 Make sure printer is properly connected to computer.

If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the
USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact
the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer with a network connection, make sure the printer is correctly set up for network use.

Cannot Find Printer while Using Wi-Fi

Cannot Find Printer while Using Wired LAN

Note

• IJ Network Device Setup Utility allows you to diagnose and repair the network status.

Select the link below to download IJ Network Device Setup Utility and install it.

Checking Printer Connection Status Using IJ Network Device Setup Utility

See below for starting up IJ Network Device Setup Utility.

For Windows:

Starting Up IJ Network Device Setup Utility

313

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments