manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 304 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 304

3.

Click 

TCP/IP

 to check the IP address, or click 

Hardware

 to check the MAC address.

Checking Communication Between the Computer, the Printer, and the

Wireless Router

Perform a ping test to check if communication is taking place.

•

For Windows:

1.

Select 

Command Prompt

 from 

Start

.

2.

Type the ping command and press 

Enter

.

The ping command is as follows: ping XXX.XXX.XXX.XXX

"XXX.XXX.XXX.XXX" is the IP address of the target device.

If communication is taking place, a message like the one shown below appears.

Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255

If 

Request timed out

 appears, communication is not taking place.

•

For macOS:

1.

Start 

Network Utility

 as shown below.

Select 

Computer

 from 

Go

 menu of Finder, double-click 

Macintosh HD

 > 

System

 > 

Library

 >

CoreServices

 > 

Applications

 > 

Network Utility

.

2.

Click 

Ping

.

3.

Make sure 

Send only XX pings

 (XX are numbers) is selected.

4.

Enter IP address of target printer or target wireless router in 

Enter the network

address to ping

.

5.

Click 

Ping

.

"XXX.XXX.XXX.XXX" is the IP address of the target device.

A message such as the following appears.

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms

--- XXX.XXX.XXX.XXX ping statistics ---

304

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments