Home
/
Canon
/
GX6000 Series
/
Online Manual

Canon GX6000 Series, Online Manual, Page: 296 / 403

Share

Page: 296 / 403

Canon GX6000 Series Online Manual Download Page 296

For details, refer to your device's instruction manual or visit the manufacturer's website.

To check the network name (SSID) for Wireless Direct specified for the printer, display it using the operation
panel of the printer or print out the network setting information of the printer.

• Display on the touch screen.

• Print the network settings.

Printing Network Settings

Check4

Have you entered the proper password specified for the Wireless Direct?

To check the password specified for the printer, display it using the operation panel of the printer or print out
the network setting information of the printer.

• Display on the touch screen.

• Print the network settings.

Printing Network Settings

Check5

Make sure the printer is not placed too far away from the device.

If the distance between the printer and device is too far, wireless communication becomes poor. Place the
printer and device close to each other.

Check6

Make sure 5 devices are already connected.

Wireless Direct does not allow more than 5 devices to be connected.

Cannot Connect to a printer via Wired LAN

Check1

Make sure the printer is turned on.

Check2

Make sure the LAN cable is connected properly.

Make sure the printer is connected to the router with the LAN cable. If the LAN cable is loose, connect the
cable properly.

If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN side of the router.

If the problem is not resolved, click here and redo setup.

Cannot Print/Scan through Network

296

«
...
294
295
296
297
298
...
»

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments