manualshive.com logo in svg

Canon GX6000 Series, Online Manual, Page: 244 / 403

Share
Download
Canon GX6000 Series Online Manual Download Page 244

Printing Photographs Saved on USB Flash Drive

You can print the photograph saved on the USB flash drive easily.

1.

Check that printer is turned on.

2.

Load paper.

3.

Insert a USB flash drive.

4.

Select 

 

Print

 on the HOME screen.

Using Touch Screen

5.

Select 

 

From USB flash drive

.

The photo selection screen is displayed.

Note

• When the message informing you that the operation restriction is enabled, ask the administrator of

the printer you are using.

• If both photo files and PDF files are saved on the USB flash drive, the confirmation screen to

select which file you print is displayed. Select 

Print photos

 in the displayed screen.

• If no printable photo data is saved on the USB flash drive, 

Saved data is not of a supported

type.

 is displayed on the touch screen.

• If more than 2,000 photo data are saved on the USB flash drive, the photo data is split by group

per 2,000 photos in reverse chronological order (date last modified) automatically. Check the
message displayed on the touch screen and select 

OK

.

6.

Specify settings as necessary.

• To select the photo to print:

Flick horizontally to select the photo.

You can also select the photo by tapping 

 or 

.

244

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Reviews:

No comments