Canon GX6000 Series Online Manual Download Page 162

Page: 162 / 403

Front View

A: Paper Support

Extend to load paper in the rear tray.

B: Rear Tray Cover

Open to load paper in the rear tray.

C: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Paper in the Rear Tray
Loading Envelopes in Rear Tray

D: Paper Guides

Align with both sides of the paper stack.

E: Paper Guides

Align with right/left/front sides of the paper stack.

F: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

Loading Paper in the Cassette

G: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

H: Operation Panel

Use to change the settings of the printer or to operate it.

Operation Panel

162

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Search results

Summary of Contents for GX6000 Series

Reviews:

Canon GX6000 Series, Online Manual, Page: 162 / 403

Search results

Summary of Contents for GX6000 Series

Reviews: