Canon GX6000 Series Online Manual Download Page 155

Page: 155 / 403

Transporting Your Printer

When relocating the printer for changing your living place, make sure of the following.

Important

• You cannot take ink out of ink tanks.

• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the

tank cap properly.

• Prepare for transporting the printer with the print head attached. This allows the printer to automatically

cap the print head, thus preventing it from drying.

• Do not remove the print head. Ink may leak.

• If ink stains the inside of the printer, wipe them using a soft cloth dampened with water.

• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• Do not tilt the printer. Ink may leak.

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as

the printer may be damaged and ink in the printer may leak.

Select

(Setup) on HOME screen.

Using Touch Screen

The setup menu screen will appear.

Select

Maintenance

The

Maintenance

screen will appear.

155

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Search results

Summary of Contents for GX6000 Series

Reviews:

Canon GX6000 Series, Online Manual, Page: 155 / 403

Search results

Summary of Contents for GX6000 Series

Reviews: