Canon GX6000 Series Online Manual Download Page 119

Page: 119 / 403

Adjusting Print Head Position

Any error in the print head installation position can cause color and line shifts. Adjusting the print head
position improves print results.

Print Head Alignment - Auto

Select

Utilities

from

Remote UI

Click

Print Head Alignment - Auto

A message appears.

Load paper in printer

Load one sheet of A4 size or Letter size plain paper into the cassette.

Run head position adjustment

Check that the printer power is on, and then click

Yes

Head alignment starts. Proceed with the operations in accordance with the messages on the screen.

Important

• Do not open the scanning unit / cover while printing is in progress; otherwise, printing will stop.

Note

• You can print and check the current settings by clicking on

Print the head alignment value

119

Summary of Contents for GX6000 Series




















































































































































































































































































































































































































Search results

Summary of Contents for GX6000 Series

Reviews:

Canon GX6000 Series, Online Manual, Page: 119 / 403

Search results

Summary of Contents for GX6000 Series

Reviews: