Canon GX5070 Online Manual Download Page 283

Page: 283 / 325

Repairing Your Printer

This section describes how to transport the printer for repairing it.

Important

• You cannot take ink out of ink tanks.

•

• Make sure the tank caps of ink tanks are closed securely. If the tank caps are open, close the tank caps

•

properly.

• Press the

button to turn off the printer with the print heads installed. The printer protects the print

•

heads by covering them automatically to prevent them from being dried.

• Do not remove the print heads. Ink may leak.

•

• If the inside of the printer becomes dirty, clean with a soft cloth that gets wet with water and squeezed

•

firmly.

• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.

•

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

•

protective material to ensure safe transport.

• Do not tilt the printer; otherwise, ink may leak.

•

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

•

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as

•

the printer may be damaged and ink in the printer may leak.

Make Sure Ink Valve is Closed

Make sure

lamp is not lit and

unplug the power cord

If the power is on, press the

button to turn off the printer.

Important

• Do not unplug the printer while the

lamp is lit or flashing, as it may cause malfunction or

damage to the printer, making the printer unable to print.

283

Summary of Contents for GX5070






































































































































































































































































































































Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands

Canon GX5070, Online Manual

Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands