Canon GX5070 Online Manual Download Page 182

Page: 182 / 325

Quiet setting

Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.

Important

• The administrator password may be required to change the settings.

•

Follow the procedure below to perform setting.

Check that printer is turned on.

Press the

Setup

button.

The

Setup menu

screen is displayed.

Select

Quiet mode

and then press the

button.

Select

Specify hrs of use

and press

button.

If you select

Specify hrs of use

, specify start time and end time.

Important

• Operating speed may be reduced compared to when

OFF

is selected.

•

• This function may not be so effective depending on the printer's setting. Furthermore, certain

•

noise, such as when the printer is preparing for printing, is not reduced.

182

Summary of Contents for GX5070






































































































































































































































































































































Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands

Canon GX5070, Online Manual

Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands