Canon G500 Series Online Manual Download Page 173

Page: 173 / 361

Ink level monitor

Select this menu from

Setup menu

•

Ink notification

•

Enables or disables the function which notifies the remaining ink.

Important

• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill

•

the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may
prevent satisfactory print quality.

• When changing the remaining ink level notification function from disabled to enabled, it is

•

necessary to refill all ink tanks up to the upper limit line.

Refilling Ink Tanks

•

Reset ink lev. count

•

Resets the remaining ink count.

If you select

Yes

, you can reset the remaining ink count of all the ink tanks at once.

If you select

, you can specify the ink color and reset the remaining ink count in any ink tank.

Important

• After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

•

If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be
detected properly.

173

Summary of Contents for G500 Series










































































































































































































































































































































































Search results

Summary of Contents for G500 Series

Reviews:

Related manuals for G500 Series

Brands by name

Popular brands

Canon G500 Series, Online Manual

Search results

Summary of Contents for G500 Series

Reviews:

Related manuals for G500 Series

Brands by name

Popular brands