Canon G4000 series, Online Manual

Page: 140 / 522

Ink notification set.
Select this menu from Setup menu .
• Ink notification
If ON is selected, the message appears on the LCD when ink runs out.
Refilling Ink Tanks
Note
• The * (asterisk) on the LCD indicates the current setting.
If this menu is changed OFF to ON , For correct operation of the function, you must refill all ink
tanks to the upper limit line appears.
Refill the ink tanks of all colors to the upper limit line and then press the OK button. If all the ink tanks
are not refilled to the upper limit line, the remaining ink level is not detected correctly.
Are all the ink tanks refilled to the upper limit line? appears.
If No is selected, Ink notification set. can not be set to ON .
Important
• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill
the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may
prevent satisfactory print quality or may cause malfunction or damage to the printer.
• Reset ink lev. count
If you refill the ink tank when remaining ink level notification function is enabled and when the remaining
ink error has not occurred, resets the remaining ink level count after refilling the ink tank to the upper
limit line.
Reset of the ink remaining amount count in one of the following ways.
◦ Resetting the remaining ink level count for all colors
◦ Resetting the remaining ink level count for some colors
If you select Yes , the following screen appears.
To reset the remaining ink level count for all colors, select Yes .
To reset the remaining ink level count for some colors, select No .
Important
• When you reset the remaining ink level count, you must refill the ink tanks of all colors to the upper
limit line. If you reset the remaining ink level count without refilling the ink tanks to the upper limit
line, the remaining ink level count cannot be reset correctly.
140