manualshive.com logo in svg

Canon g3000 series, Online Manual, Page: 705 / 852

Share
Download
Canon g3000 series Online Manual Download Page 705

Make sure the network settings of your smartphone/tablet (e.g. wireless router name, SSID, network key, etc.)
are identical with those of the wireless router.

To check the settings of your smartphone/tablet, refer to the instruction manual provided with it.

If the network settings of your smartphone/tablet are not identical with those of the wireless router, change the
network settings of it to match with those of the wireless router.

Check5

 Make sure machine is not too far away from wireless router.

The wireless router is located indoors within the effective range for wireless communication. Locate the
machine within 164 ft. / 50 m from the wireless router.

Check6

 Check for obstructions.

Wireless communication between different rooms or floors is generally poor. Move the machine and wireless
router as necessary.

Check7

 Make sure there is no source of radio wave interference nearby.

If a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router
is nearby, it may cause interference. Place the wireless router as far away from the interference source as
possible.

Cannot Communicate with Machine while It Is in Access Point Mode

If your smartphone/tablet cannot communicate with the machine in the access point mode, check the
following.

Check1

 Make sure machine is turned on.

Check2

 Enable access point mode.

Enable the access point mode following the procedure below.

1. Press and hold 

Wi-Fi

 button, and then release button when 

ON

 lamp flashes.

2. Press 

Black

 button, 

Color

 button, and then 

Wi-Fi

 button in this order.

The 

ON

 lamp changed from flashing to lit and the access point mode is enabled.

Check3

 Check settings of your smartphone/tablet.

Make sure your smartphone/tablet can use the wireless LAN.

For more on performing setting of the wireless LAN, refer to the instruction manual provided with your
smartphone/tablet.

Check4

 Have you selected machine as destination of your smartphone/tablet?

Select the access point name (SSID) of the machine with your smartphone/tablet.

705

Summary of Contents for g3000 series





















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments