manualshive.com logo in svg

Canon g3000 series, Online Manual, Page: 132 / 852

Share
Download
Canon g3000 series Online Manual Download Page 132

Press down and immediately release the 

Black

 button or the 

Color

 button. The 

Alarm

 lamp

goes off and the remaining ink level notification function is disabled.

• You can also set the remaining ink level notification function or reset the remaining ink level

counter from your computer.

Changing the remaining ink level notification setting

 (Windows)

Changing the remaining ink level notification setting (Mac OS)

Important

• If the remaining ink level notification function is disabled, check remaining ink levels and refill the ink

tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent
satisfactory print quality or may cause malfunction or damage to the machine.

Note

• If the 

Alarm

 lamp flashes, take appropriate action.

An Error Occurs

• The machine may make noise during operation.

Notes on ink bottles

Important

• Keep out of reach of children.
• Do not drink ink.
• Be careful not to get any ink in your eyes or in your mouth. (In case of eye contact or swallowing,

rinse with water and contact a doctor immediately).

• When you store ink bottles, close bottle caps completely and place bottles in standing position. If the

ink bottles are laid down, ink may leak.

• When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.
• Ink may stain clothes or other belongings permanently. Washing may not remove ink stains.
• Do not use ink bottles and ink contained therein except to refill tanks of printers specified by Canon.
• Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in a

car. Bottles may warp and cause ink leakage or ink may become poor quality.

• Do not subject ink bottles to impacts. Ink bottles may be damaged or bottle caps may come off by

such impact, and ink may leak.

• Do not transfer ink to other containers. This may result in accidental ingestion, inappropriate use, or

poor ink quality.

• Do not mix ink with water or other ink. This may damage the printer.
• Refill ink tanks quickly. Do not leave ink tanks with cap off.
• Once an ink bottle has been opened, do not leave it with bottle cap off. Ink will dry out, possibly

preventing proper operation of the machine when an ink tank is refilled using this bottle.

Note

• Color ink may be consumed even when printing a black-and-white document or when black-and-

white printing is specified. Every ink is also consumed in the standard cleaning and deep cleaning of
the print head, which may be necessary to maintain the performance of the machine.

132

Summary of Contents for g3000 series





















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments