Canon FS40 Instruction Manual Download

Page: 73 / 133

Photos

Refer to this chapter for details on taking photos and playing
them back.

Taking Photos

POINTS TO CHECK

• Please read the IMPORTANT section before using an Eye-Fi card.

1 Turn on the camcorder.

By default, photos are

recorded in the built-in memory.
You can select the memory that
will be used to record photos
(

35).

2 Press

halfway.

Once the focus is automatically
adjusted, the onscreen icon

will

turn green and one or more AF
frames will appear.

3 Press

fully.

The ACCESS indicator will flash as the photo is being recorded.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.

Operating modes:

PHOTO

COP

Summary of Contents for FS40






































































































































Search results

Summary of Contents for FS40

Reviews:

Related manuals for FS40

Brands by name

Popular brands

Canon FS40, Instruction Manual

Search results

Summary of Contents for FS40

Reviews:

Related manuals for FS40

Brands by name

Popular brands