Canon Finisher-T1, Service Manual

Page: 65 / 174

Chapter 3
3-3
F-3-8
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-9
3.1.3.5
Removing the Grate-
shaped Upper Guide
0009-3623
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
"Removing the Tray 1.").
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
F-3-10
3.1.3.6 Removing the Tray 1
0009-3624
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
F-3-11
1) Remove the screw [1] and remove the stopper [2] at
the front.
[1]
[3]
[4] [5]
[2]
[1]
[3]
[2]
[3]
[3]
[2]
[1]
[2]
[1]