Canon Finisher-T1, Service Manual

Page: 112 / 174

Chapter 3
3-50
F-3-194
3.4.2.6 Removing the Tray 1
0009-3704
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
F-3-195
1) Remove the screw [1] and remove the stopper [2] at
the front.
F-3-196
2) Remove the screw [1] and remove the stopper [2] at
the back.
F-3-197
3) Remove two screws [1], open three harness
retainers [2], and disconnect two connectors [3].
F-3-198
4) Lift tray 1 [1] to remove it.
[3]
[3]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[3]
[2]
[1]
[2]
[3]
[1]