Canon Finisher-R1, Service Manual

Page: 62 / 177

Chapter 3
3-10
Use FC5-4976 for the fixing plate [1] and FC5-4196
for the fixing plate [2].
F-3-23
3.2.2.3 Connecting to the Host
Machine
0003-1765
Check to make sure that the host machine is off,
and its power plug is not connected to the power
outlet.
1) Make the connection by matching the pin found on
the fixing plate (rear) of the host machine against the
hole in the finisher.
Check to be sure that there is no gap between the
finisher and its host machine.
F-3-24
2) Remove the screw [1], and detach the upper rear
cover (small) [2] of the finisher.
3) Fix the fixing plate (rear) of the host machine in
place to the finisher using a stepped screw [3] (M4).
[1]
[2]
[3]
[3]