Canon Finisher-R1, Service Manual

Page: 122 / 177

Chapter 4
4-47
F-4-163
4.4.2.2 Removing the Rear
Cover
0004-4695
1) Remove three screws [1] and remove the rear cover
[2].
F-4-164
4.4.2.3 Removing the Left
Upper Cover
0004-4696
1) Remove two screws [1].
2) With the upper door [2] open, remove the left upper
cover [3] by tilting to the right.
F-4-165
When replacing, hook the two claws [4] of the left
upper cover to the steel plate.
F-4-166
4.4.2.4 Removing the Grate-
shaped Upper Guide
0004-4700
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
“Removing the Tray 1.”).
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[3]
[4]
[5]
[2]
[1]