Canon Finisher-R1, Service Manual

Page: 121 / 177

Chapter 4
4-46
4.4 Electrical System
4.4.1 Finisher Controller PCB
4.4.1.1 Finisher Controller PCB
4.4.1.1.1 Removing the Rear Cover
0004-4682
1) Remove three screws [1] and remove the rear cover
[2].
F-4-160
4.4.1.1.2 Removing the Finisher
Controller PCB
0004-4683
1) Disconnect all connectors [1] on the finisher
controller PCB.
2) Remove four screws [2] and remove the finisher
controller PCB [3].
F-4-161
4.4.2 Static Charge Eliminator 1
4.4.2.1 Removing the Front
Cover
0004-8080
1) Remove screw [1] and remove the foot cover [2].
F-4-162
2) Open the front door [3] and remove three screws
[4].
3) Remove the front cover [5].
[2]
[1]
[1]
[2]