manualshive.com logo in svg

Canon FaxPhone L90, Basic Operation Manual

Share
Download
Canon FaxPhone L90 Basic Operation Manual Download Page 22

xxi

What Can I Do with This Machine?

 Copyright 

 Copyright © 2010 by Canon Inc. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any 
language or computer language in any form or by any means, electronic, mechanical, 
magnetic, optical, chemical, manual, or otherwise, without the prior written permission of 
Canon Inc. 

 Disclaimers 

 The information in this document is subject to change without notice. 
 CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER 
EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, 
THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE 
FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES 
OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL. 

 For CA, USA only 

 Included battery contains Perchlorate Material - special handling may apply. 
 See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details. 

Summary of Contents for FaxPhone L90























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands