manualshive.com logo in svg

Canon FaxPhone L90, Basic Operation Manual

Share
Download
Canon FaxPhone L90 Basic Operation Manual Download Page 21

What Can I Do with This Machine?

xx

Legal Notices

As an E

NERGY

 S

TAR

 Partner, Canon U.S.A., Inc. has determined that this 

product meets the E

NERGY

 S

TAR

 Program for energy efficiency.

The International E

NERGY

 S

TAR

 Office Equipment Program is an 

international program that promotes energy saving through the use of 
computers and other office equipment.

The program backs the development and dissemination of products 
with functions that effectively reduce energy consumption. It is an 
open system in which business proprietors can participate voluntarily.

The targeted products are office equipment, such as computers, 
displays, printers, facsimiles, and copiers. The standards and logos are 
uniform among participating nations.

Trademarks

Canon, the Canon logo, and FAXPHONE are trademarks of Canon Inc. 
All other product and brand names are registered trademarks, trademarks or service marks 
of their respective owners.

Summary of Contents for FaxPhone L90























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands