Canon FaxPhone L120, Software Manual, Page: 72 / 85

1
2
3
4
TOP
Back Previous Next
3-5
Introduction
Printing
Troubleshooting
Appendix
Table of Contents
Index
Driver Problems
Driver is not working properly.
Q Is the printer driver selected as the default
printer driver?
A Specify the corresponding printer driver as the
default printer driver for the L120.
Cannot print some fonts in a document correctly.
Q Does the document contain Adobe Type
Manager (ATM) fonts?
A ATM is not supported. Replace ATM fonts to other
appropriate fonts.
Cannot print with a printer driver other than the L120 printer.
Q Is the printer driver connected to the same port
as the L120 printer driver?
A Connect the printer driver to a port different from
the L120 printer driver.
Cannot install the L120 printer driver using the USB port.
Q Is the USB driver installed properly?
A Perform the following steps.
1. Make sure the machine is connected to your
computer using a USB cable and the machine is
turned on.
2. For Windows XP, click [Performance and
Maintenance] in the [Control Panel] folder
→
[See basic information about your computer] in
the [Performance and Maintenance] folder. For
Windows 98/Me/2000, double-click [System] in
the [Control Panel] folder. The [System
Properties] dialog box appears.
3. For Windows 2000/XP, select the [Hardware] tab
→
click [Device Manager]
→
double-click
[Universal Serial Bus controllers]. For Windows
98/Me, select the [Device Manager] tab
→
double-click [Universal Serial Bus controllers].