Canon F-1, Service Manual

Page: 136 / 179

5
5
5-2
5-2
Adjustments > Overview > Reader
Adjustments > Overview > Reader
Overview
The following is adjustment items list.
Note:
The number indicates step for each work.
Reader
Item
Main Parts
Reference
Reader Controller
PCB (replace)
Reader Controller
PCB (RAM Clear) *1
Scanner Unit Copyboard Glass
- -
(Refer to page
4-4)
-
Replacement/Before RAM Clear
P-PRINT output 1 1 p. 5-5
Using SST, upload R-CON back up data. 2 -
The newest system software download 2 p. 5-5
Replacement/After RAM Clear
Using SST, download R-CON back up data. 3 -
Input or adjustment of MTF value 3 p. 5-5
Enter the service label value (1) 4 p. 5-5
Front&Back linearity matching for computation 5 p. 5-5
Enter the service label value (2) 6 p. 5-5
Sensor output adjustment 7 p. 5-6
Tray width adjustment 8 p. 5-6
Copy image check and sharpness adjustment 9 p. 5-6
P-PRINT output 10 p. 5-6
Input the service label value packaged in the scanner unit content 1 p. 5-7
Input white level data of standard white plate. 1 p. 5-9
Sampling of B&W shading target 2 2 p. 5-7, p. 5-9
White level adjustment 3 3 p. 5-7, p. 5-9
Scanner unit replacement flag setting 4 p. 5-8
Copy image check and sharpness adjustment 5 p. 5-8
Write the value in the service label. 6 4 p. 5-8, p. 5-9
*1: If back up data of R-CON SST cannot be uploaded using SST, perform the same adjustment performed during replacement.
*2: Be sure to refer to DADF manual for adjustment during DADF refit or replacement
T-5-1