Canon EOS RP, Advanced User'S Manual, Page: 42 / 612

42
Inserting/Removing the Battery and Card
Insert a fully charged Battery Pack LP-E17 into the camera. The camera
can use SD, SDHC, or SDXC memory cards (sold separately). UHS-II/
UHS-I SDHC and SDXC cards are also supported. The captured images
are recorded onto the card.
o
Make sure the card’s write-protect switch (1) is set upward to enable
writing and erasing.
Insertion
(1)
1
Slide the card slot/battery
compartment cover lock and open
the cover.
2
Insert the battery.
z
Insert the end with the electrical
contacts.
z
Insert the battery until it locks in place.
3
Insert the card.
z
Insert the card with the label facing the
back of the camera as shown until it
clicks in place.
4
Close the cover.
z
Press the cover until it snaps shut.